ArgoCD Custom Plugins: Creating a Custom Plugin to Process OpenShift Templates

What is ArgoCD

ArgoCD describes themselves as a "declarative, GitOps continuous delivery tool for Kubernetes". If we want to break this definition down -- this is really just a nice way of saying that ArgoCD is a system that provides you a way of defining how you want your application manifests to appear, monitors a Git Repository for any changes and then provides you a way of keeping those two things in sync.

This can be quite a useful tool and actually has quite a bit of functionality already built in to get you started. If you already have Helm charts, kustomize templates, ksonnet/jsonnet or even just plain YAML files laying around, ArgoCD is ready for you! But what if that's not the case? What if your application actually relies on a seperate set of tooling that isn't built into the ArgoCD included set of features? Well, have no fear! ArgoCD actually provides you with the ability to include the tools you need inside of the project so that you can quickly get started. The way that ArgoCD handles this is through the concept of a plugin. A plugin isn’t necessarily anything special though. All it consists of is the import of any necessary binaries and instructions for how ArgoCD can use them.

But before we dig into how this can be done, there's a few concepts that we should probably review beforehand that will make this journey a bit less painful (or maybe at least make the pain bearable). ArgoCD provides you the ability to add any binaries you would like to its internal toolbox. The one catch is that the tool you are using must output YAML to stdout. That might not be too much of an issue as most tools know how to speak YAML these days. I YAML, you YAML, we all YAML at this point. The catch is that this YAML output is then interpreted/processed by kubectl. For the most part, (re: standard components/objects) this isn't an issue. However, when you're off in the wild using non-standard objects then you're going to have a small (although easy enough to overcome) issue. Keep this in mind as our particular example will bump into this issue and then put the appropriate fix in place so that we can overcome this issue.


The Problem

So what problem are we looking to solve here? As a Red Hatter, I do a lot of my work on top of OpenShift. This means that I've ended up with quite a few (OpenShift templates)[] that I use on a regular basis. But, in order to be able to use them together with ArgoCD, I need to be able to use the OpenShift client oc to process these templates before applying them. The downside is that the ‘oc’ CLI is not natively available to ArgoCD. So, we need to find a way to fix this.

Ideally, the way this would work is something like:

  • Configure ArgoCD so that it knows about the oc client and how to use it

  • Tell ArgoCD to use our new oc plugin to process our template

  • See that ArgoCD deploys all objects specified by our template

So, there are a handful of small problems that we're tackling here. Now, let's get started! The first task that we'll need to perform is to deploy ArgoCD. So let's run through this quickly.


Note: Technically, the first task that needs to be completed is to find ourselves an OpenShift cluster. We have a few options here including:

  • Local:

  • Cloud Provider - Managed

    • Openshift Dedicated - Openshift running on AWS, managed by Red Hat

    • ARO - Openshift running on Azure, managed by Red Hat and Microsoft

  • Self-Hosted

    • This is, of course, an option if you're running your own clusters. This is a much bigger “yak to shave”, so some additional effort will be required here if this is new to you.

That being said, OpenShift is only required in this instance because of our specific use case (using OpenShift templates). It isn't required in all cases where you want to add an additional plugin (ex. adding Ansible, Terraform, etc. to ArgoCD). 🚨🚨🚨

The Setup

Deploy ArgoCD

Before we can do anything though, we'll need to get ArgoCD running in our cluster. For our purposes, we'll run the current release: v1.4.2. If you are interested, you can visit their GitHub repository to take a look at this. We'll keep things simple and use the non-ha deployment, which can be deployed with the following:

> oc new-project argocd
> oc apply -n argocd -f

Once this command has been executed, you'll see output similar to the following: configured configured
serviceaccount/argocd-application-controller created
serviceaccount/argocd-dex-server created
serviceaccount/argocd-server created created created created configured configured created created created configured configured
configmap/argocd-cm created
configmap/argocd-rbac-cm created
configmap/argocd-ssh-known-hosts-cm created
configmap/argocd-tls-certs-cm created
secret/argocd-secret created
service/argocd-dex-server created
service/argocd-metrics created
service/argocd-redis created
service/argocd-repo-server created
service/argocd-server-metrics created
service/argocd-server created
deployment.apps/argocd-application-controller created
deployment.apps/argocd-dex-server created
deployment.apps/argocd-redis created
deployment.apps/argocd-repo-server created
deployment.apps/argocd-server created

You'll also want to make sure you download the CLI if you prefer to interact with ArgoCD via the command line rather than the UI. You can grab these for Linux or Mac below:

After all of these steps have been completed, you will ultimately end up with something that looks like the following. What this represents is a functioning ArgoCD system. This includes the running application server, an authentication server and the repo server (which is what will hold and interpret our custom plugin).

> oc get pods -n argocd                                                    

NAME                                             READY     STATUS    RESTARTS   AGE
argocd-application-controller-6665b6c4d5-2vs4p   1/1       Running   0          55s
argocd-dex-server-6799d954b4-xdx7w               1/1       Running   1          55s
argocd-redis-7dc58875bf-2b5kn                    1/1       Running   0          55s
argocd-repo-server-5b9ddb4f7-2w7jv               1/1       Running   0          55s
argocd-server-6b8df9749-7qz29                    1/1       Running   0          54s

Accessing ArgoCD

Reset Password - Part 1

By default, the credentials you use to access ArgoCD are admin for the username and the password being the name of the initial pod name of the argocd-server. This is a very important distinction to make because depending on the route you take, you can find yourself in a bit of an inception loop. That is -- you need the initial pod name to be able to reset your password. But in order to access ArgoCD to reset your password, you may need to patch the pod to make the argocd-server available externally. Once you patch the pod though, it spins up a new pod and at that point, you've lost the name of that first pod. In order to recover from that point, you either need to do a bit of digging (or some light digital arson) in order to get back to a point where you can reset the password. In our case though, let's be prepared and grab everything we need before patching our pod. To do this, let's search for our argocd-server pod specifically and filter everything else out:

> oc get pod -l

NAME                            READY     STATUS    RESTARTS   AGE
argocd-server-6b8df9749-7qz29   1/1       Running   0          1m

Now that we've got the value that we need (argocd-server-6b8df9749-7qz29), let's move forward and expose the argocd-server pod so that we can officially reset this password.

Expose ArgoCD UI

At this point, the ArgoCD UI isn't actually exposed outside of the cluster. This is an issue because we have no way of resetting our password, but also because in order to even interact with ArgoCD, (without the UI) we need to be able to use the CLI to contact it and set up our connection. So, let's expose this endpoint so that we can get started.

In our case, we're using OpenShift. This means that we'll be interacting with ArgoCD using a Route. This is a bit different than out of the box Kubernetes, where you would rely on an Ingress or LoadBalancer for accessing resources within the cluster. To set up our route, we can just run:

> PATCH='{"spec":{"template":{"spec":{"$setElementOrder/containers":[{"name":"argocd-server"}],"containers":[{"command":["argocd-server","--insecure","--staticassets","/shared/app"],"name":"argocd-server"}]}}}}'

> oc -n argocd patch deployment argocd-server -p $PATCH

> oc -n argocd create route edge argocd-server --service=argocd-server --port=http --insecure-policy=Redirect

Once these commands have been executed, you can verify that a route exists:

> oc get routes -n argocd

NAME            HOST/PORT                                         PATH      SERVICES        PORT      TERMINATION     WILDCARD
argocd-server             argocd-server   http      edge/Redirect   None

h/t to Mario Vázquez who I grabbed this from here.


Note: However if you're following along and want to use just Kubernetes, you can choose to rely on some LoadBalancer magic from your cloud provider, or run something like MetalLB locally. To expose a LoadBalancer service, you can just run:

> kubectl patch svc argocd-server -n argocd -p '{"spec": {"type": "LoadBalancer"}}'

Otherwise, if you're going to rely on Ingress, you can follow the instructions that the ArgoCD project supplies here.


Reset Password - The Finale

Now that we have an endpoint that can be used to configure ArgoCD, let's reset our password. We can do this by using the host value of the route that we created along with the ArgoCD CLI:

> argocd login --grpc-web

Once we run this, we'll be prompted for a username and a password:

INFO[0000] tracing enabled=false                        
Username: admin

Remember -- we need to use the value that we got for the argocd-server pod before we patched our deployment. If we try to use the new podname, we're going to run into issues.

Pain Point: 🔥There was mention of some light arson🔥

That's right. You may find yourself in a position where you can't grab the original pod name, but you don't necessarily want to redeploy everything all over again. This is fine. We'll just need to (digitally) burn a few things down. What you'll need to do is modify the appropriate secret and remove two admin keys. After this, delete your argocd-server pod and it will repopulate the secret with new and appropriate values. But this time, make sure you take note of the podname! Otherwise you'll likely need to repeat these steps.

But, with all that being said, as long as we use the appropriate pod value, we should see something that looks more like the following:

'admin' logged in successfully
Context '' updated

And now that we're logged in, we can run:

argocd account update-password

From here, you'll be prompted for the existing password and then will be able to set your own. Do this now, otherwise you'll be fumbling around for that pod name during the rest of your development!

#Bonus Content: Use Openshift Authentication

So as you can see, there is a bit of a dance required in order to reset the password if you're going to be making changes or exposing ArgoCD externally. Surely we have the technology to make this less painful! Well as a matter of fact, we do, and you have a few options here in general. But, specifically, for OpenShift, we now have the ability to integrate with OpenShifts authentication system. This is a bit outside of the scope of this blog, but you can take a look at the details here from Andy Block.

Adding your custom plugin: The oc client

Now that we've got a functional system, we can begin adding our own bits to it. In our case, we are looking to add the ‘oc’ client to ArgoCD and then let ArgoCD know how to use it. The first thing we will need to do is get our ‘oc’ binary situated where it needs to be. This means that we'll need to edit the argocd-repo-server deployment. There are two approaches we can take here depending on how complicated the plugin we're trying to add is. In our instance, we only need to add a single binary to the system (the oc client). This fits into the much simpler use case of just creating an initContainer, a volume and then mounting that volume into the repo-server.

If it gets much more complicated than this (or if you have multiple binaries that you would like to add), the better option is to craft your own repo-server image by extending the existing image (using your tooling of choice), and then have the repo-server use that image instead. This decision all comes down to your specific implementation. But in our case, we'll be going with the first approach that we described. To accomplish this task, we want to add the following patch:

  - name: download-custom-tools
    command: [sh, -c]
    - cp /usr/bin/oc /custom-tools/oc
    - mountPath: /custom-tools
      name: custom-tools
  - name: argocd-repo-server
    - mountPath: /usr/local/bin/oc      
      name: custom-tools
      subPath: oc
  - name: custom-tools
    emptyDir: {}

Let's unroll this a bit so that we understand what's going on.


The first thing you'll notice is that we're adding an initContainer. We're doing this because we need to be able to initially grab the oc binary from somewhere so that it can later be passed along to the main argocd-repo-server image. We could do something like just utilizing a simple base image that has wget installed and then pulling the binary down from some endpoint. But, luckily for us, the OpenShift team already has done the heavy lifting for us. The team provides a container image that has the binary included. So, what we can do is specify this as the image our initContainer uses ( Now that we know that the container that will be running as part of the initContainer already has the oc client available, all we need to do is copy it to our volume so that it can later be mounted by the repo server. We know that the oc client itself sits at /usr/bin/oc, so the only thing to do is to specify the args to our shell command (cp /usr/bin/oc /custom-tools/oc). The last step is to provide our mount and then we have a fully functional initContainer that loads an image that contains the oc client and then copies it over so that it can later be used by the repo server.


The next component to this patch is the container itself. There is a considerable amount of configuration already specified by default and provided inside of the existing repo server deployment. We absolutely do not want to have to provide these configurations inside of our patch as they are likely to change between different versions of ArgoCD and would add a considerable amount of overhead to maintain inside our patch just to keep up with this. However, due to the strategic-merge nature of the patch command, all we need to do is provide the name of the container (argocd-repo-server) along with the components which we would like to add. In our case, this tells the container where to mount the volume that contains our oc binary. Here we’re defining where we would like the deployment to make the oc client available (/usr/local/bin/oc). Once this has been patched in, the repo-server will then have the oc client available.


The last (and very critical) part of this patch is creating the volume that the oc client will be installed to (so that it can be shared between the initContainer and the actual repo-server container). Without this volume, you may be moving the oc client around, but it'll never be available to the repo-server. So make sure that this gets included!

Putting it all together

So now that we have our patch ready, let's apply this and validate that our client is available as expected. To do this, we can just run the following:

> PATCH='{"spec": { "template": { "spec": {"initContainers": [{"name": "download-custom-tools","image": "","command": ["sh","-c"],"args": ["cp /usr/bin/oc /custom-tools/oc"],"volumeMounts": [{"mountPath": "/custom-tools","name": "custom-tools"}]}],"containers": [{"name": "argocd-repo-server","volumeMounts": [{"mountPath": "/usr/local/bin/oc","name": "custom-tools","subPath": "oc"}]}],"volumes": [{"name": "custom-tools","emptyDir": {}}]}}}}' 

> oc patch -n argocd deployment argocd-repo-server -p $PATCH

After running the above command, we should then see:

deployment.extensions/argocd-repo-server patched

We can also take this one step further and connect to the pod and verify that the oc client is available. Use the oc rsh command to check this out. After running this against the appropriate pod name, we should see the below:

> oc rsh argocd-repo-server-5bb9476d4d-h9gqt oc version                    

Client Version: v4.2.0-alpha.0-342-gb6d9dcb

Great! Our client is now available. But at this point, ArgoCD still doesn't know how to use it. This of course leads us on to the next phase.

Let ArgoCD know how to utilize our custom plugin

So while the oc client is now available to Argo, it doesn't quite know how to use it yet. In order to change this, we'll need to modify the argocd-cm ConfiMmap. Out of the box, there isn't any actual data in here. So we'll want to patch this object with the following:

  configManagementPlugins: |
    - name: oc-template
        command: ["bash","-c"]
        args: ["if [ ! -z ${MERGE_TYPE} ]; then MERGE_TYPE=\"--type=${MERGE_TYPE}\"; else MERGE_TYPE=\"\"; fi && if [ -f ${TEMPLATE_NAME} ] || [[ ${TEMPLATE_NAME} =~ ^https? ]] ; then TEMPLATE_NAME=\"-f ${TEMPLATE_NAME} --local\"; fi && oc process ${TEMPLATE_NAME} --param-file=${PARAM_FILE} -o=json -n ${ARGOCD_APP_NAMESPACE} | oc patch -f - -p '{\"metadata\":{\"annotations\":{\"\":\"Validate=false\"}}}' --dry-run=true -o=json ${MERGE_TYPE} -n ${ARGOCD_APP_NAMESPACE} | oc create -f - --dry-run=true -o=yaml -n ${ARGOCD_APP_NAMESPACE} > app.yaml"]
        command: ["sh", "-c" ]
        args: ["oc create -f app.yaml --dry-run=true -o=yaml"]

As you can see, this isn't the most elegant looking solution. But, we can talk about the specifics of what it is performing here in a moment. The important piece to know is that this configuration is providing ArgoCD with the appropriate knowledge of our new plugin and the commands required to run when it is called. Just as with getting the binary in place, there is a bit to unpack here. So, let's take a look so we understand the YAML that we're shoving into our ConfigMap.

configManagementPlugins is the key that ArgoCD uses to store all of the custom configurations that you may need to add to the system. This is where you will provide all of your custom plugins and the command (or set of commands) that are required in order for it to spit out the appropriate YAML to deploy resources into your cluster.

From here, each plugin consists of the same basic parts: name, init and generate. The name field is used to specify what you will refer to your plugin by inside of your ArgoCD application so that it knows to run the appropriate set of commands. Init is an optional component, but can be very useful. This is where you would specify any number of commands that need to happen to prepare your environment to generate the yaml. It can also be used to hack around and prettify your yaml output before ultimately sending the final product to the next phase. The last (and required) component of your plugin is the generate step. This is the command that is run to send your YAML to stdout, which will ultimately be applied by kubectl. Now that we know what a plugin consists of, we can start to specify the steps required to begin utilizing our OpenShift templates.

The oc-template plugin

So what pieces do we need to cobble together our OpenShift plugin?


Our init phase is just a tiny, in-line bash script. There are two small pieces of logic and then it pipes some inputs between different oc commands. Once this is all complete, the appropriate output is piped to a file called app.yaml. So, why is all of this necessary?


The small if statement that we have included here is to determine whether we need to tack the -f and --local flags onto our commands because we're working with either local or remote files. If this isn't the case, then we just omit those flags and we will be working with internal cluster templates. The second if statement checks to see if there is a specific merge type specified. This is required for the scenarios where the default strategic merge type that the patch command uses does not function appropriately.

Piping Madness

The next part of our init command has us use three different oc commands:

  • process : The process command is used to apply our parameters into our templates. We utilize the TEMPLATE_NAME and PARAM_FILE environment variables that we created in our ArgoCD Application YAML to point to our templates and param values. We then specify that our output be displayed in JSON format. I was seeing some oddities about how output was being handled when specifying YAML for these initial steps. So I recommend sticking with JSON for now. You'll also notice that I supply the appropriate namespace during each step of this oc chain. This is because I noticed that if I didn't do this, ArgoCD would use the default project when applying the resources. I’m currently unsure if this is some logic baked into the system or simply the templates that I'm working with. But, for now, this is a limitation on this plugin (i.e. only being able to have a single app and it's components be deployed to a single namespace).

  • patch : This step is required so that we can deploy OpenShift specific components that kubectl doesn't know how to deal with (DeploymentConfigs, Routes, etc.). Here, we apply a patch that applies the": "Validate=false" annotation to all objects. This may be a bit overkill and may be able to be pruned down at a later point. But for now, this will get us where we need to go. We also want to ensure that we're using the --dry-run flag so that it just spits the output of this command to stdout and doesn't try to apply this to the cluster immediately. This allows us to get the new output with our new annotation applied and also allows us to pass this on to the last step in this chain. We also ensure that we're receiving our output in JSON again due to the same issues I mention above.

  • create : This last phase outputs the actual list of objects to be applied to our cluster. We again use --dry-run so that we just get our output sent to stdout. This time though, we get this output in YAML and we write it out to a file. You may be wondering why I chose to use create here instead of apply. This is actually due to how ArgoCD chooses to do diffing on the objects that it is tracking. When you use apply in your plugin before ArgoCD itself does it's apply, it registers the last-applied-config annotation as part of the YAML definition. This then leads to all future syncs reporting as OutOfSync because your previous configuration doesn't have some of the labels that ArgoCD injects. To work around this, we just execute a create and use --dry-run so that we get our output, but we see that nothing is actually being created on the cluster (and thus there is not last-applied-config because nothing has been applied up to that point).

So at this point, we then have our YAML stored in app.yaml and we are ready to send this to the next phase to be deployed into our cluster. From here, the hard work is done.


The generate command is actually the same oc create command that we ran as the last stage of our init chain. Having these split like this might be overkill at this point. But, to ensure that we have everything in the appropriate format, this will get the job done. This may be a point to revisit later though. So, after this command runs, it again outputs our yaml to stdout. However this time, it is then captured by ArgoCD and is then applied using kubectl (if you are going to allow ArgoCD to auto-sync). Otherwise, it will show you the diff that will be applied to the cluster until you manually sync them yourself.

The only other "missing" piece here that hasn't really been addressed are the TEMPLATE_NAME and PARAM_FILE variables. We use them, but don't really see where they get set. This comes soon, but just know that it's all just stored in another YAML file.

So, now that we understand a bit more about what the above configuration does, we can deploy these changes to the cluster. We can do this by running the following patch in our project.

> PATCH='{"data":{"configManagementPlugins": "- name: oc-template\n  init:\n    command: [\"bash\",\"-c\"]\n    args: [\"if [ ! -z ${MERGE_TYPE} ]; then MERGE_TYPE=\\\"--type=${MERGE_TYPE}\\\"; else MERGE_TYPE=\\\"\\\"; fi \u0026\u0026 if [ -f ${TEMPLATE_NAME} ] || [[ ${TEMPLATE_NAME} =~ ^https? ]] ; then TEMPLATE_NAME=\\\"-f ${TEMPLATE_NAME} --local\\\"; fi \u0026\u0026 oc process ${TEMPLATE_NAME} --param-file=${PARAM_FILE} -o=json -n ${ARGOCD_APP_NAMESPACE} | oc patch -f - -p '{\\\"metadata\\\":{\\\"annotations\\\":{\\\"\\\":\\\"Validate=false\\\"}}}' --dry-run=true -o=json ${MERGE_TYPE} -n ${ARGOCD_APP_NAMESPACE} | oc create -f - --dry-run=true -o=yaml -n ${ARGOCD_APP_NAMESPACE} \u003e app.yaml\"]\n  generate:\n    command: [\"sh\", \"-c\" ]\n    args: [\"oc create -f app.yaml --dry-run=true -o=yaml\"]\n"}}'

> oc patch -n argocd configmap argocd-cm -p $PATCH

configmap/argocd-cm patched


Alright, so where are we now? We've got an ArgoCD server running and we can successfully communicate with it. We've also configured this server to include our oc plugin and also know how to use it. At this point, we've officially added a custom plugin to ArgoCD and we'll be able to use it. Now it's time for the payoff -- let's see this thing in action!

Using our custom plugin

ArgoCD refers to their deployments using a Custom Resource Definition (CRD) called an Application. This is a bit generic, which is why I've been specifically referring to them as ArgoCD Applications up to the point. As with most systems, you have a few options when deciding on how you would like to deploy these ArgoCD Applications. However, because of how we need to pass in certain values (the environment variables I mention above), we can't necessarily use all of them (yet?). If we want to use our oc-template plugin, we are limited to just crafting a YAML definition for the Application resource. This is a bit disappointing because otherwise, the ArgoCD client and UI are pretty useful. However, it doesn't expose functionality (that I've found) in order to specify that environment variables that we need. So, for that reason, we'll need to skip these for now.

A quick OpenShift aside

Ultimately , what we're trying to do here is add the ability to utilize our oc client in order to deploy OpenShift templates into our OpenShift clusters. There are really three use cases that we have when interacting with our OpenShift templates, so we'll want to make sure that our plugin can handle them as they're described below:

  • Local Templates - These are templates that exist "locally". Meaning, that at the time of execution, we will be referring to them on the local filesystem versus some remote endpoint. In terms of ArgoCD, we run across these when our templates exist within a repository that we control.

  • Remote Templates - These are templates that do not exist locally within our git repository. Generally, we will be referring to a url that points to a repository that we don't necessarily control. You can think of this as using someone else's templates, but then storing your configurations (param files) within your own repository. There are risks here for sure, and one could argue that this doesn't necessarily jive completely with a pure GitOps strategy. But that's a conversation for another time.

  • Cluster Templates - These are templates that are included with the OpenShift release. Rather than having to store these in your own repositories, you can just depend on these to be there in your cluster. This allows you to again, just worry about your configurations and not necessarily the components themselves.

The Application CR YAML

When creating an ArgoCD Application, there are a handful of properties that are required by default:

  • Name - Just a name that you'll give ArgoCD to refer to your Application

  • Source: The place that you point ArgoCD at to resolve your Application. This is a git repository of some sort that either holds your YAML or Helm charts at this point. In our case, this will be the repository that is holding our OpenShift template (or just parameter files if we happen to be pointing at someone else's template).

  • Destination: Cluster information for where you would like to deploy this to. This includes both the cluster definition and the namespace that will be used.

In our case, we're using a custom plugin. So we need to make sure to define this as well. Components that get included here are:

  • Name - Name of the plugin that has already been defined and configured. In our case, this will be oc-template.

  • Env - We can also specify a number of environment details here. In our case, we need to specify (at least) two environment variables so that our plugin can use them (TEMPLATE_NAME and PARAM_FILE). You can also define ARGOCD_APP_NAMESPACE and MERGE_TYPE if desired.

In the end, our YAML will look something like:

kind: Application
  name: my-awesome-remote-nexus
  namespace: argocd
  project: default
    targetRevision: master
    path: nexus

    # plugin specific config
      name: oc-template
      # environment variables passed to the plugin
        - name: TEMPLATE_NAME
        - name: PARAM_FILE
          value: app.params

  # Destination cluster and namespace to deploy the application
    server: https://kubernetes.default.svc
    namespace: remote-nexus

In our above example, we'll be creating an application for the Nexus Repository Manager that uses a remote OpenShift template. We will then apply our Application definition and it will use this remote template along with the params file that is contained within our repository. To deploy this, we'll run the following command and then we should be able to see this both from the CLI as well as in our ArgoCD UI.

> oc get Application -n argocd

This should then show us a result similar to the following:

NAME                      AGE
my-awesome-remote-nexus    1h

Since we don't have this application set to AutoSync, we'll need to manually sync this for now. This would be another setting that you could provide in your Application definition. If you're interested in other settings that can be set, you can take a look at this example here. But for now, we can run these manually either through the UI by clicking on our Application and syncing the components, or by running the below command with the ArgoCD CLI:

> argocd app sync my-awesome-remote-nexus

You will then get a message saying that everything is synced and then we should be able to see the components that have been deployed (again either from the CLI or UI). Once this has been completed, we're officially done! We've added our OpenShift plugin to the system and have successfully deployed an OpenShift template from wherever they are stored!

What did we learn?

We've seen that it's possible to take a tool that you need and extend ArgoCD so that you can continue to benefit from OpenShift templates that you may already have, while also gaining the benefit of the GitOps practices that ArgoCD provides.

With that being said, we can see that there are some intricacies involved in getting our tool to spit our YAML exactly the way that ArgoCD wants it. Realistically, this is where you will spend the majority of your time. But, if you happen to be looking specifically for an OpenShift templates plugin, the hard work is already done for you with the information shared in this blog!

PS: Some limitations

Currently, the plugin as described in this article can only handle a single template per Application CR. This means that for your deployments, you'll need to cobble everything into a larger template containing multiple items. This is definitely something I'm working on as we iterate on this plugin. However, the goal of this article was to demonstrate how to extend ArgoCD to use a custom plugin, not necessarily to write the most efficient one. I'll be sure to follow up on this as I continue to make improvements.Stay tuned!